Tools & accessories

RAUKANTEX tools give you innovative solutions for every stage of the edging process.

RAUKANTEX Foliex

You can use RAUKANTEX Foliex to remove protective foil quickly and easily from any edgeband.

RAUKANTEX Foliex is exceptionally easy to use, and requires minimal physical strength.

RAUKANTEX finisher

After milling radii with the RAUKANTEX external or internal planes, use the RAUKANTEX finisher.

The tool’s special mixture of sisal and textile fibres makes it ideal for smoothing edgebands, removing any tell-tale signs of processing, and cleaning away any extraneous material.

RAUKANTEX flap wheel

The RAUKANTEX flap wheel can be used wherever there’s a sharp edgebands to be rounded off, such as after working on an edgeband using the RAUKANTEX cutter set, or when smoothing down and rounding off individual parts. Rounding and polishing gives the edgeband an immaculate, high-end finish and removes any excess adhesive residue at the same time, without damaging the pattern on the edgeband or the surface of the panel. The flap wheel can be attached to and powered by any standard drill.

Key features:

Smooths and polishes for an immaculate, high-end finish
Can be used for all standard edgeband materials
Adhesive residue is removed without damaging the material
Outstanding performance, accuracy and build quality

RAUBOND hot-melt adhesive

Whether RAUKANTEX edgebands, edging service or edging tools: REHAU is the right partner for your projects. And the best adhesive edgeband also needs the best adhesive. It isn’t easy to find the right combination among the variety of edgeband materials and adhesives. We will help you to do this!

Discover our new hot-melt adhesives for perfect processing of furniture components.
The powerful duo for your furniture components: RAUKANTEX & RAUBOND.

The advantages of RAUBOND hot-melt adhesive

Perfectly coordinated with our adhesion promoter edgebands
Can be processed easily with every melt adhesive machine
Strong adhesion
Everything from a single source: Hot-melt adhesives can easily be supplied with ordered edgebands
Available in a 25 kg bag
Colors: White and beige

Details RAUBOND EVA 111 / 112

High-filled hot-melt adhesive
Uncomplicated processing properties
Higher tolerance under divergent processing temperature
About 250 g/m² application amount

Density at 20 °C [g/cm³]	1.52 +/- 0.03 (pycnometer, 100 ml)
Color	RAUBOND EVA 111 (beige) RAUBOND EVA 112 (white)
Viscosity at 200 °C [mPa·s]	75,000 +/- 10,000 (Brookfield)
Processing temperature [°C]	190 - 210
Feed rate [m/min]	8-60
Softening range [°C]	approx. 90 +/- 5
Open time at 190 °C [s]:	approx. 8 +/- 1 (measured on a 200 μm film)

Details RAUBOND EVA 121 / 122

Low-filled hot-melt adhesive
An all-rounder on EVA base with good processing properties
Higher instant adhesion – suitable for edgeband processing machines, soft-forming
Smaller application amounts of about 190g/cm², sparing use for a thinner and sealed joint

Density at 20 °C [g/cm³]	1.14 +/- 0.03 (pycnometer, 100 ml)
Color	RAUBOND EVA 121 (beige) RAUBOND EVA 122 (white)
Viscosity at 200 °C [mPa·s]	85,000 +/- 13,000 (Brookfield)
Processing temperature [°C]	180 - 200
Feed rate [m/min]	8-75
Softening range [°C]	approx. 95 +/- 5
Open time at 190 °C [s]:	approx. 12 +/- 1 (measured on a 200 μm film)